Speed Skate Sizing Chart & Millimeter Foot Tracing Guide
Speed skating boots—whether short track, long track, or inline speed skates—do not match US street shoe or hockey skate sizes. Carbon speed boots are engineered to fit bare-foot (or with an ultra-thin racing sock) with zero heel lift so every watt of leg push transfers directly into the blade.
How to Trace & Measure Your Bare Foot in Millimeters (4 Easy Steps)
- Stand Barefoot on Blank Paper: Tape a sheet of paper against a flat wall on a hard floor. Place your bare heel gently flush against the wall and stand with equal weight on both feet (knees slightly bent in skating posture).
- Mark Longest Toe & Widest Forefoot Points: Holding a pen strictly vertical (90 degrees to the floor—do not angle under your foot), mark the tip of your longest toe and the widest inner and outer points of your forefoot. Repeat for both left and right feet!
- Measure in Millimeters (mm): Use a metric ruler to measure straight from the wall edge to your longest toe mark (Foot Length in mm) and across the widest forefoot marks (Foot Width in mm). Always size to your larger foot.
- Match Your Millimeter Measurement Below: Find your bare-foot millimeter range in the chart below—never add “extra room” for thick socks unless sizing growing young Learn-to-Speed-Skate beginners (max +3–4mm).
Bont Speed, Inline & Ice Skate Millimeter Size Chart
Scroll or view on mobile to compare Foot Length (mm) to Bont Size, EU Size, and forefoot width ranges:
| Foot Length (mm) | Bont Size | EU Size | Standard Width (mm) | Wide Fit (mm) | Double Wide (mm) | Narrow Fit (mm) |
|---|---|---|---|---|---|---|
| 150 - 162 mm | 9 C | 27 | 75 and under | 76 - 80 | - | - |
| 163 - 171 mm | 10 C | 28 | 70 - 78 | 79 - 83 | - | 69 and under |
| 172 - 179 mm | 11 C | 29 | 72 - 80 | 81 - 85 | - | 68 - 71 |
| 180 - 188 mm | 12 C | 30 | 74 - 82 | 83 - 87 | - | 69 - 73 |
| 189 - 198 mm | 13 C | 31 | 75 - 84 | 85 - 89 | - | 70 - 74 |
| 199 - 203 mm | 13.5 C | 32 | 77 - 86 | 87 - 91 | - | 72 - 76 |
| 204 - 207 mm | 1 | 33 | 78 - 87 | 88 - 92 | 93 - 97 | 73 - 77 |
| 208 - 215 mm | 2 | 34 | 81 - 90 | 91 - 95 | 96 - 100 | 76 - 80 |
| 216 - 219 mm | 2.5 | 34.5 | 82 - 91 | 92 - 96 | 97 - 101 | 77 - 81 |
| 220 - 224 mm | 3 | 35 | 84 - 93 | 94 - 98 | 99 - 103 | 79 - 83 |
| 225 - 228 mm | 3.5 | 35.5 | 85 - 94 | 95 - 99 | 100 - 104 | 80 - 84 |
| 229 - 232 mm | 4 | 36 | 86 - 96 | 97 - 101 | 102 - 106 | 82 - 86 |
| 233 - 237 mm | 4.5 | 36.5 | 87 - 97 | 98 - 102 | 103 - 107 | 82 - 86 |
| 238 - 241 mm | 5 | 37 | 89 - 98 | 99 - 103 | 104 - 108 | 84 - 88 |
| 242 - 246 mm | 5.5 | 37.5 | 90 - 100 | 101 - 105 | 106 - 110 | 85 - 89 |
| 247 - 250 mm | 6 | 38 | 91 - 101 | 102 - 106 | 107 - 111 | 86 - 90 |
| 251 - 255 mm | 6.5 | 38.5 | 92 - 103 | 104 - 108 | 109 - 113 | 87 - 91 |
| 256 - 259 mm | 7 | 39 | 94 - 104 | 105 - 109 | 110 - 114 | 89 - 93 |
| 260 - 264 mm | 7.5 | 40 | 95 - 105 | 106 - 110 | 111 - 115 | 90 - 94 |
| 265 - 268 mm | 8 | 41 | 96 - 107 | 108 - 112 | 113 - 117 | 91 - 95 |
| 269 - 272 mm | 8.5 | 41.5 | 97 - 108 | 109 - 113 | 114 - 118 | 92 - 96 |
| 273 - 277 mm | 9 | 42 | 99 - 110 | 111 - 115 | 116 - 120 | 94 - 98 |
| 278 - 281 mm | 9.5 | 43 | 100 - 111 | 112 - 116 | 117 - 121 | 95 - 99 |
| 282 - 286 mm | 10 | 44 | 101 - 112 | 113 - 117 | 118 - 122 | 96 - 100 |
| 287 - 290 mm | 10.5 | 45 | 102 - 114 | 115 - 119 | 120 - 124 | 97 - 101 |
| 291 - 295 mm | 11 | 46 | 104 - 115 | 116 - 120 | 121 - 125 | 99 - 103 |
| 296 - 299 mm | 11.5 | 47 | 105 - 117 | 118 - 122 | 123 - 127 | 100 - 104 |
| 300 - 304 mm | 12 | 48 | 106 - 118 | 119 - 123 | 124 - 128 | 101 - 105 |
| 305 - 308 mm | 12.5 | 49 | 107 - 119 | 120 - 124 | 125 - 129 | 102 - 106 |
| 309 - 313 mm | 13 | 50 | 109 - 121 | 122 - 126 | 127 - 131 | 104 - 108 |
| 314 - 317 mm | 13.5 | 51 | 110 - 122 | - | - | - |
Mounting Spacing & Heat Molding Tips (Bont, CBC & Viking)
- 165mm vs. 195mm Mount Spacing: Most short track boots and youth speed boots use 165mm two-point mounting, while adult inline frames and many long track setups use 195mm (or standard metric clap bridge slots). Need help matching boots and blades? Email a photo of your foot tracing + millimeter numbers to info@saltygoldsupply.com.
- Heat Molding Carbon Boots: Bont and CBC heat-moldable boots are designed for at-home heat molding in a standard convection oven—always follow each manufacturer’s exact temperature and time instructions (typically ~70°C / 160°F for 15–20 minutes; never use a direct heat gun on carbon/epoxy).