Salty Gold Pro Burr Diamond Plate

Salty Gold Pro Burr Diamond Plate — Zero-Flex MIC-6 Cast Aluminum De-Burring Stone

Built inside the Utah Olympic Oval for short track and long track speed skaters, club technicians, and precision sharpeners, the Salty Gold Pro Burr Diamond Plate ($36.99 single plate / $69.99 2-Stone Pro Kit) eliminates the flex and dishing found in ordinary stamped-metal or mineral burr stones.

At the core of every plate is a stress-relieved, poured MIC-6 cast aluminum tooling block bonded with height-calibrated monocrystalline diamonds. Unlike rolled 6061 aluminum or thin flex plates that bow under thumb pressure and bevel a 90-degree speed edge, cast MIC-6 stays permanently dead-flat so every pass contacts flush along the side wall of 62–64 HRC PM and bi-metal steel (EHS StayBent, Viking, Nagano, Maple, Bont).

Available Dual-Sided Grit & Pro Kit Options

• 140 / 400 Grit ($36.99 — Coarse Burr Removal & Nick Repair): Rapidly knocks down heavy reshaping burrs after 140/400 jig work or rescues nicked edges between heats at meets.
• 600 / 1200 Grit ($36.99 — Race-Day Deburring & Mirror Finishing): 600-grit medium face shears away fine jig honing burrs cleanly; 1200-grit fine face polishes runner side walls to a low-drag mirror finish.
• 2-Stone Pro Kit + Free Stone Holder ($69.99 — Reg. $79.98 Value, Save $9.99):
  • Complete 4-Grit Jig-to-Raceday System (140 / 400 / 600 / 1200): Pair the Blue 140/400 coarse plate for heavy burr knockdown and travel-meet nick rescue with the Red 600/1200 finishing plate for final race-day mirror deburring.
  • FREE Laser-Engraved Velvet Slide Tin Stone Holder ($6.00 Value Included Free): Matte-black 80 × 35 × 10.9 mm steel slide case lined with high-density acoustic velvet, engineered to cradle both 25 mm MIC-6 diamond burr plates rattle-free inside your sharpening jig kit or skate bag.

Key Specifications & Advantages

• Poured MIC-6 Cast Aluminum Core: Zero bending, warping, or dishing across years of sharpening-room use.
• Dual-Sided Monocrystalline Diamond Faces: Fast, uniform cutting on ultra-hard 64 HRC powder-metallurgy speed steel and uncoated hockey/figure stainless steel.
• True 90-Degree Edge Preservation: Rigid reference surface prevents accidental edge rounding after MIC-6 Double-Sided Bench Stone jig progressions.
• Pocket & Jig-Box Ready: Compact 25 mm footprint fits cleanly alongside EHS StayBent, CBC, and Bont sharpening jigs.

Looking specifically for hollow-ground hockey runner guidance? View our Salty Gold Hockey Skate Stone — Pro Burr MIC-6 Diamond Honing Stone and Complete Burr Stone Guide.